Owner's Manual

BATTERY INSTALLATION

1. Make sure the unit is turned OFF.

2. Locate the battery cover on the bottom of the

unit. Use a coin or screwdriver to loosen the

screw.

3. Install 2 new “AA” (UM-3/LR6) batteries following

the diagram inside the battery box. (The use of

new alkaline batteries is recommended for

maximum performance.)

4. Replace the battery cover and tighten the screw

to secure the battery cover.

BATTERY NOTICE

• Install batteries correctly observing the polarity ( +, - ) signs to avoid

leakage.

• Do not mix old and new batteries.

• Do not use batteries of different types.

• Remove exhausted or new batteries from the equipment when the unit

will not be used for an extended period of time.

• Do not dispose of batteries in fire.

• Do not attempt to recharge ordinary batteries.

• The supply terminals are not to be short-circuited.

• Only batteries of the same and equivalent type as recommended are to

be used.

WE DO NOT RECOMMEND THE USE OF RECHARGEABLE

BATTERIES.

NOTE: If for some reason the program/activity stops working, please follow

these steps:

1. Please turn the unit OFF.

2. Interrupt the power supply by removing the batteries.