Instruction manual

4. Close the battery cover.

NOTE: For best performance, use new alkaline batteries.

RECHARGEABLE BATTERIES ARE NOT RECOMMENDED.

The Nitro Vision™ Infrared Keyboard operates on 2 “AA”-sized batteries (sold

separately).

1. Locate the battery cover on the bottom of the unit and

open it.

2. Insert 2 “AA”-sized batteries as illustrated.

3. Close the battery cover.

NOTE: For best performance, use new alkaline batteries. Please replace batteries when

any of the following events occur:

1. The IR keyboard does not register that a key has been pressed.

2. The Caps Lock light does not light up when the Caps Lock is activated.

3. The IR emitter on the keyboard does not light up when a key is pressed.

RECHARGEABLE BATTERIES ARE NOT RECOMMENDED.

BATTERY NOTICE

• Install batteries correctly observing the polarity (+, -) signs to avoid leakage;

• Do not mix old and new batteries;

• Do not mix batteries of different types: alkaline, standard (carbon-zinc) or rechargeable

(nickel-cadmium);

• Remove the batteries from the equipment when the unit will not be used for an extended

period of time;

• Always remove exhausted batteries from the equipment;

• Do not dispose of batteries in ﬁre;

• Do not attempt to recharge ordinary batteries;

• The supply terminals are not to be short-circuited;

• Only batteries of the same and equivalent type as recommended are to be used.

WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES.

Notice: When the Nitro Vision™ is running on batteries, you may see this icon

appear on the TV screen. This indicates that battery power is low. Please

replace the batteries as soon as possible.

AC ADAPTOR

• Use a standard 9V 300mA AC/DC adaptor. We recommend the use of a VTech

9V AC/DC adaptor.

SET-UP