Instruction manual

3
Do not use more batteries than recommended.
Remove batteries from the toy if it will not be used for an extended period of time.
Do not dispose of batteries in fire.
AC-DC ADAPTOR
Use a VTech
®
adaptor or any other standard adaptor that complies with
EN61558 DC 9V 300mA center-positive adaptor.
CONNECTING THE ADAPTOR
1. Make sure the unit is OFF.
2. Locate the adaptor jack at the back of the unit.
3. Insert the adaptor plug into the unit’s adaptor jack.
4. Plug the adaptor into a wall outlet.
5. Turn the unit ON.
NOTE: When the toy is not going to be in use for an extended period of time,
unplug the adaptor.
ADAPTOR NOTICE
The toy is not intended for use by children under 3 years old.
Only use the recommended adaptor with the toy.
The adaptor is not a toy.
Never clean a plugged-in toy with liquid.
Never use more than 1 adaptor.
Do not leave the toy plugged in for extended periods of time.
NOTICE TO PARENTS
Regularly examine the adaptor, checking for damage to the cord, plug, transformer
or other parts. Do not use the adaptor if there is any damage to it.
USING THE MOUSE
Move the mouse in the direction you want the cursor to move.
Click the mouse button to make a selection.
CLEANING THE MOUSE
Following the arrows, use a screwdriver to open the
cover on the bottom of the mouse.
Take the ball out of the mouse and use a dry cloth to
clean the mouse and the ball.
Place the ball back in the mouse, replace the mouse
cover and screw the cover closed.
1.
2.
1.
2.
3.
GETTING STARTED