Owner's Manual

5
ASSEMBLY INSTRUCTIONS
1. Place the leg into the walker as
shown. Put the leg into the slot as
far as it can go. Test to make sure
the leg is locked securely in place.
2. Repeat this procedure with the other
leg.
NOTE: Once the legs have been attached and securely locked into place,
the legs cannot be removed from the walker.
TO BEGIN PLAY
1. Slide the ON/OFF/ACTIVITY
SELECTOR SWITCH to the
TALKING ACTIVITY ( ) or the
MUSIC ACTIVITY ( ) position to
turn the unit ON. You will hear “Let’s
go!” followed by a bear laughing
sound effect. All the number/music
note buttons will flash.
2. To adjust the volume, slide the VOLUME
CONTROL SWITCH located on the
back of the activity panel to ( ) for
LOW VOLUME or ( ) for HIGH
VOLUME.
Let's go!