Specifications

www.vtechphones.com
47
Additional information
Troubleshooting
If you have difculty operating your telephone, the suggestions below should solve the problem. If you still have
difculty after trying these suggestions, call VTech Communications at 1 [phone]. In Canada, call VTech
Telecommunications Canada Ltd. at 1 [phone].
Problem Suggestion
My phone doesn’t
work at all.
• Make sure the power cord is plugged in.
• Make sure the telephone line cord is plugged rmly into the telephone base and the telephone
wall jack.
• Disconnect the AC adapter for a few minutes, and then reconnect it.
• Charge the battery in the handset for 16 hours. For optimum daily performance, return the
handset to its telephone base when not in use.
• Reset the telephone base. Unplug the unit’s electrical power. Wait for 15 seconds then plug it
back in. Allow up to one minute for the handset and telephone base to synchronize.
• You may need to purchase a new battery. Please refer to the
Batteries section of this user’s
manual.
I cannot get a dial
tone.
• Try all the suggestions above.
• Move the handset closer to the telephone base. You might have moved out of range.
• Your line cord might be malfunctioning. Try installing a new line cord.
• If the previous suggestions don’t work, disconnect the telephone base from the telephone jack
and connect a different telephone. If there is no dial tone on that telephone either, the problem
is in your wiring or local service. Contact your local telephone company.