Specifications

www.vtechphones.com
42
Answering system operation
When the message alert function is turned on and there are unreviewed messages, the telephone base
beeps every 10 seconds, and the number of messages in the oval message window ash.
If the number in the message window is on steadily, there are no new messages.
Announcement only mode
In announcement only mode, callers hear an announcement but cannot leave messages. When
announcement only is turned on, calls are answered with the pre-recorded announcement “We’re
sorry. Messages to this number cannot be accepted” or you may record your own message.
Turn announcement only mode on or off
• Press SETUP four times, the system will announce “Announcement only. Record no messages. To change
the setting, press CHANGE.”
• Press
CHANGE until you hear the desired option (on or off).
• Press
PLAY/STOP /
to save your selection and exit.
Record the announcement only message
1. Press SETUP four times, the system will announce “Announcement only.
Record no messages. To change the setting, press CH ANGE.”
2. Press
CHANGE until you hear the option “on”.
3. Press
SETUP three times, the system will announce “Announcement.
Press PLAY or press RECORD. To continue, press SETUP.”
4. Press REC/MEMO. The system will announce, “Record after the tone.
Press STOP when you are done.” Speak toward the MIC to record an announcement for up to 90
seconds.
5. The elapsed time (in seconds) will be shown in the message window while recording.
6. Press
PLAY/STOP / when nished recording. The system will play back the recorded message
before saving it.