Specifications

www.vtechphones.com
18
Telephone settings
• The handset will
not ring when a
call comes in if
the ringer volume
is at the lowest
setting.
• Settings for the
handset and
the telephone
base must be
programmed
separately. For
example, when
you set the ringer
volume for the
handset, it will not
be automatically
set in the
telephone base.
•
Key tone is preset
to ON.
Ringer volume
• With the telephone base in idle (off) mode, press MENU then
press or until RINGER VOLUME is shown.
• Press SEL. You will hear a sample of the ringer.
• Press
, or a digit (0 through 6). You will hear a sample of
the new ringer volume and the volume bar will be increased or
decreased each time the setting is adjusted. At the lowest setting,
the ringer will be turned off and the display will show:
-OR-
• With the telephone base in idle (off) mode, pressing
or of
the volume control will go directly to the ringer volume menu.
• Press or of the volume control to adjust the ringer
volume.
Ringer tone
• With the telephone base in idle (off) mode, press MENU, then
press or until RINGER TONE is displayed.
• Press SEL. Then press , or a digit (0 through 9). You will
hear a sample of the ringer tone and you will see the number of
that ring tone (0 - 9).
• Press SEL to conrm.
Key tone
• With the telephone base in idle (off) mode, press MENU, then
press or until KEY TONE is displayed.
• Press
SEL. The current setting will be shown. Press or to
see ON or OFF. When set to on, the telephone base will emit a
beep whenever a key is pressed.
• When the desired option is shown, press
SEL.
>RINGER VOLUME
RINGER TONE
>KEY TONE
OFF
>RINGER TONE
KEY TONE
RINGER VOLUME
>RINGER VOLUME