System information

JP9 - Keyboard Power Select

JP9 Selection

(1-2)* Powered by +5V*

(2-3) Powered by +5V Standby

Hardware Setup

Keyboard Password Power on

This motherboard provides a special security feature of keyboard password

power on. The feature is enabled in integrated peripherals menu of CMOS

setup. There are two modes of operations.

(1) single Key Turn on - if you set a single key password, the system will

turn on immediately after you press the password key.

(2) Keys Sequence Turn on - if you set a password with more than one

character, ie. a combination of keys, the system will turn on after you

press the password key sequence and then a <enter>.

Please notice that the power button will have no function if the keyboard

password power on feature is password.

Close Open

* =Default setting

JP8, JP15 - BIOS Program Voltage / BIOS Select

JP8 JP15 Selection

(1-2) (1-2) INTEL (1MB)

(1-2) (2-3) MX (1MB)

(2-3) (2-3) ATMEL/SST/Winbond (1MB)

(2-3) (2-4) ATMEL/SST/Winbond (2MB)

JP8 & JP15 are pre-installed in the factory. They should NOT be altered by

the users.

Pin List of Special Connectors:

1.CN7: USB connector 2.CN8: PS/2 Mouse

1 VCC 2 GND

3 USBP1- 4 USBP0+

5 USBP1+ 6 USBP0-

7 GND 8 VCC

1 VCC

2NC

3 MS_DATA

4 GND

5 MS_CLK