System information

JP29 - Keyboard Power Select

JP29 Selection

(1-2)* Powered by +5V*

(2-3) Powered by +5V Standby

(Allows Keyboard Power On)

Keyboard Password Power On

This motherboard provides a special security feature of keyboard password

power on. The feature is enabled in Integrated Peripherals Menu of CMOS

setup. There are two modes of operations.

(1) Single Key Turn On - if you set a single key password, the system will

turn on immediately after you press the password key.

(2) Keys Sequence Turn On - if you set a password with more than one

character, ie. a combination of keys, the system will turn on after you

press the password key sequence and then a <enter>.

Please notice that the power button will have no function if the keyboard

password power on feature is enabled.

Close Open

* =Default setting

Hardware Setup

JP8, JP23 - BIOS Program Voltage

JP8 JP23 Selection

(1-2) (1-2) INTEL (1MB)

(1-2) (2-3) MX (1MB)

(2-3) (2-3) ATMEL/SST/Winbond (1MB)

(2-3) (2-4) ATMEL/SST/Winbond (2MB)

JP8 & JP23 are pre-installed in the factory. They should NOT be altered by

the users.