User`s manual

10
Mute
The mute function allows you to hear the other party but
the other party cannot hear you.
During a call, press MUTE/REMOVE on the handset. The
handset screen shows MUTED for a few seconds and
MUTE appears until mute function is turned off.
Press MUTE/REMOVE again to resume the
conversation. The handset screen temporarily shows
MICROPHONE ON.
Ringer mute
When the telephone is ringing, press OFF/CLEAR or
MUTE/REMOVE to temporarily silence the ringer without
disconnecting the call. The next call rings normally.
Call waiting
If you subscribe to call waiting service from your telephone service provider,
you hear an alert tone if there is an incoming call while you are on another
call. Press to put your current call on hold and take the new call. Press
at any time to switch back and forth between calls.
Find handset
Use this feature to page all system handsets.
Press /FIND HANDSET on the telephone base. All idle handsets ring
and the screens show ** PAGING **.
To end paging, press , , any dialing keys (0-9, #, *), or press
/FIND HANDSET on the telephone base.
1.
2.
1.
2.
PHONE 0:00:00
MUTED
MUTE
RINGER MUTE
Telephone operation