User’s manual w w w. v t e c h .
Table of contents 1. IMPORTANT SAFETY INSTRUCTIONS .......................1 2. SETTING UP THE TELEPHONE ...................................2 2.1 2.2 2.3 2.4 Package contents ..............................................................2 Location .............................................................................2 Setting up ..........................................................................3 2.3.1 Connecting the charger .....................................3 2.3.
1. IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all the instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4.
2. SETTING UP THE TELEPHONE 2.1 Package contents The package contains the following items: ･ 1 Handset ･ 1 Charger ･ 1 AC power adapter 1 Rechargeable battery pack 1 Chinese operation manual 1 English operation manual Location For maximum coverage and reduce the interference, here are some guidelines you should consider when you place the base unit, - place it at a convenient, high, and central location with no obstructions between the handset and base unit in an indoor environment.
2.3 Setting up 2.3.1 Connecting the charger 1. Plug the power supply into the charger. 2. Plug the power supply cord into the wall outlet not controlled by a wall switch. 3. Always use the cables provided in the box.
2.3.2 Installing and charging the battery pack 1. Slide out the battery compartment cover. 2. Place the supplied battery pack as indicated. Locate the battery pack lead and connector and plug it into the socket inside the battery compartment (the red wire should be on the left). Tuck the battery pack leads in the space above the battery pack. 3. Slide the battery compartment cover back. 4. Put the handset on the charger or base and charge the battery pack for 16 hours first time.
2.4.2 Change the Time Format U/D to select SETTINGS. Press SELECT and U/D to select TIME FORMAT. Press SELECT and U/D to select 12 - HOUR or 24 - HOUR. 1. Press MENU and 2. 3. 4. Press OK to confirm. 2.4.3 Set Date/Time 1. Press MENU and U/D to select SETTINGS. 2. Press SELECT to select SET DATE/TIME, and then press SELECT. 3. Enter the date by the keypad, using the date format you set in Section 2.4.1. OR Press U/D until the screen displays the correct value. Press OK to advance. 4.
3. GETTING TO KNOW YOUR PHONE 3.1 Overview of your handset 9. Home/Flash In idle mode: Press to make a home call. In ringing mode: Press to answer a home call. Flashes quickly when there is an incoming home call. Flashes slowly when a home call is on hold. 10. Alphanumeric keypad, *, # In idle/pre-dial/editing mode/during a call: Press to enter characters/ numbers. # In idle/pre-dial/during a call mode: Press to insert a "#". * In idle/pre-dial/during a call mode: Press to insert a "*".
3.2 Handset LCD display 1 21 2 Speakerphone - the speakerphone is in use. CELL line - on steadily when the cell line is in use or there is an incoming cell call. New answering system message - indicates you have a new answering system message(s). 12 Bluetooth connected device(s) - indicates that there are Bluetooth connected devices on the active devices list. 12 Bluetooth disconnected device(s) - indicates that there are Bluetooth disconnected devices on the active devices list.
3.3 Charger Getting to know your phone Charger contacts 3.4 Navigating the menus 1. Press MENU. 2. Press U/D to scroll through the menu. 3. Press SELECT to open a sub-menu or validate an option. 4. Press F to go back to previous menu level or cancel an action.
3.5 Menu map In idle mode, press MENU will firstly access the Ans. system menu. Refer to the following for the menu structure. Main Menu ANS.
4. USING ADDITIONAL HANDSETS You can add new handsets to your telephone system, but each device must be registered with the telephone base before use. When first purchased, each expansion handset shows "NOT REGISTERED". You may need to charge the handset before registering to the telephone base. 4.1 Registration 1. Put the handset on the base, "PRESS HOLD ON BASE FOR 4 SEC" will display in the handset screen. Or use your handset menu. 1. Press MENU and U/D on the handset to select SETTINGS.
4.2 Intercom and Conference Call This feature allows you to make internal calls, transfer external calls and make conference calls. 4.2.1 Intercom Using a handset: 1. Press MENU and U/D on the handset to select INTERCOM. U/D to select the base or the desired handset you want to intercom with. 2. Press SELECT and 3. Press SELECT, and the called base or handset will ring. 4. Press OR Press h on the called base to answer the call. T or S on the called handset to answer the call. Using the base: 1.
4. Press OR Press 5. Press T or S on the called handset to answer the call. h on the called base to answer the call. F on the calling handset to end the call, and the external call will be transferred to the called base or handset automatically. Using additional handsets Using the base: During an external call: 1. Press OPTION to select INTERCOM. 2. Press SELECT and to select the desired handset you want to intercom with. 3. Press SELECT.
Using the base: 1. Follow steps from 1 to 4 in Section 4.2.2. 2. Press OPTION on the calling base to select CONFERENCE. 3. Press SELECT to initiate the 3-way conference call. Note: During the conference call, any internal party hangs up to leave the conference, it will leave the other one still in connection with the external call. 4.2.4 Switch between internal call and external call Using a handset: During a conference call: 1. Press OPTION on the calling handset to select SINGLE, and then press SELECT.
5. TROUBLESHOOTING If you have difficulty with your phone, please try the suggestions listed below. Please also check the user's manuals of VTech LS6245 for more detailed troubleshooting items. Problem Solutions • • • My telephone does not work at all. • • • Low battery shows on screen. • • • • The battery does not charge in the handset or the handset battery does not accept charge. • • • Place the handset in the telephone base or charger for recharging.
• The CHARGE light is off. • • • • • • There is interference during a telephone conversation. My calls fade out when I am using the handset. • • • • 15 Clean the charging contacts on the handset and telephone base each month with a pencil eraser or a dry non-abrasive fabric. Make sure the power adapter and telephone line cord are plugged in correctly and securely. Unplug the power adapter. Wait for 15 seconds before plugging it back in.
• REGISTRATION FAILED appears on the • handset. • • • • • • • If the telephone is not responding normally, put the handset in the telephone base or charger. If it does not respond, try the following (in the order listed): Disconnect the power to the telephone base. Disconnect the battery pack on the handset. Wait a few minutes before connecting power to the telephone base. Re-install the battery pack and place the handset in the telephone base or charger.
6. TECHNICAL SPECIFICATIONS Basic Information Dimensions Handset : L203.65 X W42.00 X H21.5mm Charger : L83.80 X W91.60 X H57.25mm Weight Handset: 142.5g (include battery pack: 21g) Charger: 83.6g Power consumption Charger: 0.8w Valid range Indoor: 50m Outdoor: 300m Handset Operating Time Standby time: 100 Hours Talk time: 10 Hours RF Parameter Transmission Power Handset: +24dBm Frequency Cordless system: 1881.792~1897.344MHz Bluetooth system: 2.400~2.
Customer Service Centre Suite 1601, Lever Tech Centre, 69-71 King Yip Street, Kwun Tong, Kowloon, Hong Kong.
