Cordless Telephones User's Manual

www.vtechphones.com
5
Getting started
Basic operation
Getting started
Install an image
Perform steps 2 through 9 of the Battery installation and
charging procedure on page 3.
Use the enclosed template to cut the desired image so
that it ts into the transparent image cover.
Place the selected image inside the transparent image cover.
Place the image face down inside the transparent image cover
with the top of the image at the end with the large tab.
Replace the transparent image cover by placing it at
against the handset and sliding it towards the CHARGE
light until it clicks into place as shown in the gure.
Charge the handset by placing it in the telephone base.
The handset CHARGE light will be on when correctly
placed in the telephone base.
1.
2.
3.
4.
5.
6.
You can also
go to www.
vtechphones.com
and use the online
tool to create
your own custom
graphic inserts.
•