User`s manual

5
PRODUCT ASSEMBLY
1. Carefully fill the bubble reservoir with
bubble solution. Do not overfill as
this may cause the bubble solution
to spill. Do not dilute the bubble
solution, using concentrated bubble
solution will produce the best bubbles
(bubble solution not included).
2. Choose a surface on the wall
surrounding the tub where the
suction cup support unit can
be mounted securely. The area
should be clean and dry before
suctioning the unit to the wall.
For better suction, we suggest
wetting the suction cups before
attaching them to the wall. Press
the suction cups onto the wall
and flip the tabs out to secure the
suction cup support unit. Once the
unit is attached to the wall, test the
strength of the suction by pulling
gently on the unit. The suction
cups may not stick properly to
textured tiles. We recommend that
the unit be removed from the wall
after each use as the strength of
the suction cups cannot support
prolonged use.
Product Assembly