User`s manual

9
AUTOMATIC SCREEN OFF
To preserve battery life, the screen will automatically shut off after a
short period of time when in clock mode.
Note: The auto screen off time can be set in Settings / Advanced / Auto
Screen Off. Please refer to the Settings section in this manual.
In other activities, it will return to clock mode automatically if there is no
input for 1 minute. When in camera mode, it will auto exit after 3 minutes.
When in slideshow, the auto exit time is 15 minutes.
If you have a timer running, it will return to the timer screen instead of
watch mode. The watch will not shut off automatically when the timer is
running.
BATTERY STATUS
The remaining battery capacity will be displayed on the main menu screen.
When the battery level is low, only the clock display function is available.
It is recommended to recharge the battery before further use.
When the battery level is too low, the watch will not turn on until it is
charged.
CONNECT TO A COMPUTER
FOR FILE TRANSFER
You can connect Kidizoom
®
Smart Watch to a PC or Mac computer
using the included micro USB cable. Once connected, you can transfer
les between the watch and computer. Please follow the following steps
to make the connection.
• Pull up the rubber cover of the micro USB port on the side of your watch.
• Insert the micro USB cable (small end) into the micro USB port on the
watch.
• Insert the larger end of the micro USB cable into a USB port on the
computer. A USB port is usually marked with this symbol
.
• You will see a removable drive called VTech 1557, please use this to
transfer les to and from the watch. There is another removable drive
called VT SYSTEM, which is for storage of system data.
Note: Once the watch is connected to your computer, do not disconnect
the watch whilst les are uploading or downloading. After you have
nished, remove the watch by following the steps to safely remove
hardware from your computer. You can then physically unplug the watch
from the computer.
BATTERY STATUS / CONNECT TO A COMPUTER