Operation Manual

AUTOMATIC SHUT-OFF

To preserve battery life, the VTech

Kidilook

™

will automatically

turn off after several minutes without input. Turn the unit on again

by pressing the On/Off Button. The auto shut off timer can be

changed in the setup mode.

CONNECTING TO A PC

Connect Kidilook

™

to a PC with the USB cable, and then you

can start downloading photos and creating photo stories with the

included PC software, the Kidilook™ Photo Manager.

1. Locate the USB port on the back of your Kidilook

™

and slide

the door open.

2. Insert the USB cable (smaller end) into the USB port on the

Kidilook

™

3. Insert the larger end of the USB cable into a USB port on the

computer. A USB port is usually marked with this symbol .

MINIMUM SYSTEM/ HARDWARE REQUIREMENTS FOR PC

CONNECTION & CD ROM INSTALLATION:

• Pentium 4/ Celeron1GHz or equivalent

• Windows

2000 SP3+/ XP / Vista

• 1024 x 768 24-bit Graphics Card

Note: Once the Kidilook

™

is connected to the PC, it will turn on

automatically. Do not disconnect the Kidilook

™

or the computer

while photos are being downloaded to the Kidilook

™

To Begin Using Kidlook

™