User Guide

Table Of Contents
108
109
Add and register handset
When your handset is deregistered from
the telephone base, follow the steps
below to register it back to the telephone
base.
NOTES
Charge the new handset without
interruption for at least 30 minutes
before registering it to the telephone
base.
You cannot register a handset if any
other system handset is in use.
To register a handset to the telephone
base:
1. Put the handset you wish to register
on the telephone base cradle.
2. The handset shows Registering....
If the registration is successful, the
handset screen displays Registered
and beeps. The handset is now
registered with the telephone base.
If registration fails, Registration failed
appears on the handset screen. The
handset shows To register HS... see
manual and the telephone base returns
to idle mode. This may take up to five
minutes to occur. Please start again from
Step 1.
Handset screen display
messages
Blocked call An incoming call is
blocked.
Calling HS X
(For models
with two
or more
handsets
only)
The handset is calling
another handset (for
intercom calls).
Ended You have just ended a
call.
Home
screening...
The telephone is
screening an incoming
home call.
HS X is
calling (For
models with
two or more
handsets
only)
Another handset is
calling.
Intercom The handset is on an
intercom call.
Intercom to:
(For models
with two
or more
handsets
only)
You have started the
intercom process,
and need to enter the
number of the device
you wish to call.
Line in use An extension
telephone on the
same line or one of the
handsets is in use.
List empty There are no directory
entries or call block list
entries.
Low battery The battery needs to
be charged.
Microphone
on
Mute is off so the other
party can hear your
voice.
Muted The microphone is off,
the other party cannot
hear your voice.
New
voicemail
There are new
voicemail messages
from your telephone
service provider.
No battery The handset in the
telephone base or
charger does not have
a battery properly
installed.
No line There is no telephone
line connected.
No message There are no messages
in the answering
system.
Not available Someone else is
already using the
directory, caller ID log
or answering system.
General product care
Taking care of your telephone
Your cordless telephone contains
sophisticated electronic parts, so it must
be treated with care.
Avoid rough treatment
Place the handset down gently. Save
the original packing materials to protect
your telephone if you ever need to ship
it.
Avoid water
Your telephone can be damaged if
it gets wet. Do not use the handset
outdoors in the rain, or handle it with
wet hands. Do not install the telephone
base near a sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause
power surges harmful to electronic
equipment. For your own safety, take
caution when using electrical appliances
during storms.
Cleaning your telephone
Your telephone has a durable plastic
casing that should retain its luster for
many years. Clean it only with a dry non-
abrasive cloth. Do not use dampened
cloth or cleaning solvents of any kind.