User Guide

100
101
Set ringer volume
You can select the ringer volume for
incoming home and cell calls. When the
ringer is off,
appears on the screen.
To set the ringer volume on home line:
1. Press MENU/SELECT in idle mode.
2. Press q CID or p to highlight
Ringers, then press MENU/SELECT.
3. Press q CID or p to select Home
volume, then press MENU/SELECT.
4. Press q CID or p to sample each
ringer volume for home line.
5. Press MENU/SELECT to save.
To set the ringer volume on cell lines:
1. Press MENU/SELECT in idle mode.
2. Press q CID or p to highlight
Ringers, then press MENU/SELECT.
3. Press q CID or p to select Cell
volume, then press MENU/SELECT.
4. Press q CID or p to sample each
ring volume for cell lines.
5. Press MENU/SELECT to save.
Telephone base ringer volume
When the telephone base is idle, press
VOL + or VOL - on the telephone base to
adjust the ringer volume.
When you set the ringer volume to zero,
the base ringer is off and the system
announces, “Base ringer is off.”
NOTE
• Changing the handset ringer volume
does not affect base ringer volume.
• If the ringer volume is set to off, that
handset or the telephone base is
silenced for all incoming calls.
• The ringer volume level also
determines the ringer levels of
intercom calls.
Sound settings
Set number of rings
You can set the answering system to
answer an incoming call after two, three,
four, five or six rings; or toll saver.
If you choose toll saver, the answering
system answers a call after two rings
when you have new messages, or
after four rings when you have no new
messages. This enables you to check
for new messages and avoid paying
unnecessary long distance charges if
you are calling from outside your local
area. By default, the answering system
answers an incoming call after three
rings.
1. Press MENU/SELECT when the
phone is not in use.
2. Press q CID or p to choose
Answering sys, and then press
MENU/SELECT.
3. Press q CID or p to choose
Ans sys setup, and then press
MENU/SELECT.
4. Press q CID or p to highlight #
of rings, then press MENU/SELECT.
5. Press q CID or p to choose from
6, 5, 4, 3, 2 or Toll saver.
• Toll saver - the answering system
answers a call after two rings
when you have new messages, or
after four rings when there is no
new message. This feature allows
you to check for new messages
and avoid paying long distance
charges when calling from out of
your local area.
6. Press MENU/SELECT to save.
NOTE
• If Smart call blocker is on, the first
ring of all calls will be muted.