User Guide

80
81
Record your name for all screening
announcements
1. Press MENU/SELECT to enter the main
menu when the handset is not in use.
2. Press q CID or p to
scroll to Smart call blk. Press
MENU/SELECT.
3. Press q CID or p to scroll
to Screening annc, then press
MENU/SELECT.
4. Press MENU/SELECT to select Rec
your name. The system announces,
“Record after the tone. Press 5 when
you are done.”
5. Speak towards the handset to record
your name. Press 5 to end recording.
To listen to the announcement with your
recorded name again, scroll to Play annc
and press MENU/SELECT.
Reset all your screening announcements
1. Press MENU/SELECT to enter the main
menu when the handset is not in use.
2. Press q CID or p to
scroll to Smart call blk. Press
MENU/SELECT.
3. Press q CID or p to scroll
to Screening annc, then press
MENU/SELECT.
4. Press q CID or p to scroll to Reset
annc, then press MENU/SELECT.
The screen shows Reset annc?. Press
MENU/SELECT again to confirm. The
screen shows Annc reset. before
returning to the previous menu.
Your name will be deleted from all the
screening announcements, and the
telephone will use the default screening
announcements.
Voice guide to set Smart call
blocker
This feature is an easy and alternative way
for you to do the basic setup of Smart
call blocker. You can follow the voice
guide to set your telephone system to
allow or to screen all incoming home
calls, or to screen home calls that do not
display a phone number.
1. Press MENU/SELECT to enter the
main menu when the handset is not
in use.
2. Press q CID or p to
scroll to Smart call blk. Press
MENU/SELECT.
3. Press q CID or p to scroll
to Voice guide, then press
MENU/SELECT.
4. You hear a voice prompt “Hello! This
voice guide will assist you with the
basic setup of Smart call blocker...”
5. Set up your Smart call blocker
feature by inputting the designated
numbers, as instructed in the voice
guide.
• Press 1 if you want to screen home
calls with telephone numbers that
are not saved in your directory,
allow list or star name list; or
• Press 2 if you do not want to
screen calls, and want to allow all
incoming calls to get through.
NOTES
• The screening feature of Smart call
blocker is applicable to home calls
only. All incoming cell calls will get
through and ring. If you want to
block a cell call, add the number to
the block list. See Block list.
• You can press OFF/CANCEL on the
handset to quit the voice guide at
any time.
• After a power outage, the telephone
prompts you to set the date and time.
After the date and time setting is
done or skipped, the telephone will
prompt if you want to set up Smart
call blocker via voice guide. Press
MENU/SELECT to start the setup.