User`s manual

Telephone operation
46
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to touch-tone dialing
temporarily during a call. This is useful if you need to send touch-tone signals to
access your telephone banking or long distance services.
During a call, press on the handset.
Use the dialing keys to enter the number you wish to dial. The telephone sends
touch-tone signals. It automatically returns to pulse dialing mode after you end
the call.
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the directory,
caller ID log or redial list while you are on a call using the handset.
Chain dialing can be useful if you wish to access other numbers (such as bank
account numbers or access codes) from the directory, caller ID log or redial list.
To access a number from the directory while on a call with the handset:
Press OPTION.
Press SELECT to select Directory.
Press q or p to scroll to the desired entry.
Press DIAL to dial the displayed number.
To access a number from the caller ID log while on a call with the handset:
Press MENU.
Press q or p to scroll to Caller ID log, then press SELECT.
Press q or p to scroll to the desired entry.
Press DIAL to dial the displayed number.
To access a number from the redial list while on a call with the handset:
Press REDIAL to enter the redial list.
Press q or p or REDIAL repeatedly to browse to the desired entry.
Press DIAL to dial the displayed number.
Press CANCEL to exit the directory, caller ID log or redial list when you are on
a call.
1.
2.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.