User`s manual

Getting started
16
Install the doorbell wall mount cover
Option 2: Install the doorbell wall mount cover with the wall mount plate
Use a pencil to mark the exact location
of the screw holes on the wall.
Mark an extra mark for routing the
power cord through the wall.
Then remove the wall mount and
drill two holes in the wall. Check for
reception strength and camera angle
before drilling the holes.
1. Stick the double-sided adhesive tapes
onto the wall mount plate as specified.
2.
Align and place the wall mount cover
onto the wall mount plate. Make sure
the sign is pointing upward.
3.
Stick
here
If you drill the holes into a stud, go to
Step 5.
-OR-
If you drill the holes into an object other
than a stud, insert the wall anchors into
the holes and tap gently on the ends
with a hammer until the wall anchors are
flush with the wall.
4.
An extra
mark