User`s manual

Getting started
14
Install the doorbell wall mount cover
Make sure to test the reception and the doorbell position before you mount the
doorbell on the wall. See Locating the doorbell on pages 10-13 to choose a desirable
position for the doorbell.
There are two ways to position the wall mount cover and manage the power
adapter cord.
Option 1: Install the doorbell wall mount cover without the wall mount plate
Use a pencil to mark two holes on the desired location. Then remove the wall
mount and drill two holes in the wall. Check for reception strength and camera
angle before drilling the holes.
1.
If you drill the holes into a stud, go to step 3.
-OR-
If you drill the holes into an object other than a stud, insert the wall anchors into
the holes and tap gently on the ends with a hammer until the wall anchors are flush
with the wall.
2.