User`s manual

73
Remote access code
Use this code to select a three-digit number to allow remote access of the
answering system from another telephone. You can change the code to any
number from 000-999. This code is 333 by default.
1. When the deskset is idle, press ANS SYS.
2. Press or to scroll to Ans Sys Setup, then press
MENU/SELECT or /SKIP.
3. Press or to scroll to Remote Code, then press
MENU/SELECT or /SKIP.
4. The screen displays Remote Code. Use the dialing
keys to enter a three-digit remote code.
• Press DELETE to delete a digit.
• Press /REPEAT or /SKIP to move the cursor to
the left or right.
5. Press MENU/SELECT to save the setting and return to
the previous menu. To exit without making changes,
press CANCEL.
Message date/time
The message date and time is set to Announce by default. During message
playback, you hear the date and time the message was received. You can
change this setting to skip the date and time information.
1. When the deskset is idle, press ANS SYS.
2. Press or to scroll to Ans Sys Setup, then press
MENU/SELECT or /SKIP.
3. Press or to scroll to Msg Date/Time, then press
MENU/SELECT or /SKIP.
4. Press or to choose Announce or Skip.
5. Press MENU/SELECT or /SKIP to save the setting
and return to the previous menu. To exit without
making changes, press CANCEL or /REPEAT.
Answering system
Answering system setup
Ans Sys Setup
>Remote Code
Msg Date/Time
Message Alert
Play Messages
Private Mailbox
>Ans Sys Setup
Record Time
Ans Sys Setup
Remote Code
>Msg Date/Time
Message Alert
Msg Date/Time
>Announce
Skip
Remote Code
333