User`s manual

67
1. When in the caller ID history, press or to browse to the number you
wish to save.
2. Press MENU/SELECT, then press or to choose
Copy to DIR.
3. Press MENU/SELECT. The screen displays Enter
Name. Use the dialing keys to edit the name.
• Press DELETE to delete a character.
• Press /REPEAT or /SKIP to move the cursor to
the left or right.
4. Press MENU/SELECT to save. The screen displays
Enter Number. Use the dialing keys to edit the
number.
• Press DELETE to delete a digit.
• Press /REPEAT or /SKIP to move the cursor to the left or right.
• You can include a pause while storing a dialing sequence that requires
one during actual dialing. Press or to choose Add pause, then press
MENU/SELECT. A P appears on the screen.
• Store a signal for switching to temporary tone signaling. If you have dial
pulse (rotary) service, this signal is required for some special services.
Press or to choose Send tone, then press MENU/SELECT. A T appears
on the screen. All numbers you enter after this will send touch-tone signals
during dialing.
• You can store the flash signal required by some special services as part of a
dialing sequence. Press or to choose Add flash, then press
MENU/SELECT. An F appears on the screen. Continue storing the number
as usual.
5. Press or to scroll to Done, then press MENU/SELECT. To exit without
making changes, press CANCEL.
NOTE: You will need to change how a caller ID number is dialed if the entry does not appear
in the correct format. Caller ID numbers may appear with an area code that might not be
necessary for local calls, or without a 1 that might be necessary for long distance calls (see
View dialing options on page 66 for more information).
Caller ID
Caller ID operation
8005959511
>Copy to DIR
Copy to 1-touch
Delete
001/090NEWL1
Enter Number
8005959511_
Select to:
Done
L1