User`s manual

Copy a directory entry to one touch

1. When a directory entry appears, press MENU/SELECT.

2. Press or to choose Copy to 1-touch, then press MENU/SELECT.

3. The screen displays Enter Number. Use the dialing

keys to edit the number.

• Press DELETE to delete a digit.

• Press /REPEAT or /SKIP to move the cursor to

the left or right.

• You can include a pause while storing a dialing

sequence that requires one during actual dialing.

Press or to choose Add pause, then press

MENU/SELECT. A P appears on the screen.

• Store a signal for switching to temporary tone

signaling. If you have dial pulse (rotary) service,

this signal is required for some special services.

Press or to choose Send tone, then press MENU/SELECT.

A T appears on the screen. All numbers you enter after this will send

touch-tone signals during dialing.

• You can store the flash signal required by some special services as part

of a dialing sequence. Press or to choose Add flash, then press

MENU/SELECT. An F appears on the screen. Continue storing the number

as usual.

4. Press or to scroll to Done, then press MENU/SELECT.

5. The deskset displays Press a 1-touch key to save the number.

• Press the one-touch button for the destination party in the upper location.

-OR-

• Press LOWER, then press the one-touch button for the destination party in the

lower location.

6. The deskset displays Number saved to 1-touch key.