User`s manual

61
Directory
Dial, delete or edit entries
Edit an entry
1. When a directory entry appears, press MENU/SELECT.
2. Press or to choose Edit, then press MENU/SELECT.
3. The screen displays Enter Name. Use the dialing keys
to edit the name. If you only want to edit the number,
skip to step 4.
• Press DELETE to delete a character.
• Press /REPEAT or /SKIP to move the cursor to
the left or right.
4. Press MENU/SELECT to save. The screen displays
Enter Number. Use the dialing keys to edit
the number.
• Press DELETE to delete a digit.
• Press /REPEAT or /SKIP to move the cursor to
the left or right.
• You can include a pause while storing a dialing
sequence that requires one during actual dialing.
Press or to choose Add pause, then press
MENU/SELECT. A P appears on the screen.
• Store a signal for switching to temporary tone signaling. If you have dial
pulse (rotary) service, this signal is required for some special services.
Press or to choose Send tone, then press MENU/SELECT.
A T appears on the screen. All numbers you enter after this will send
touch-tone signals during dialing.
• You can store the flash signal required by some special services as part
of a dialing sequence. Press or to choose Add flash, then press
MENU/SELECT. An F appears on the screen. Continue storing the number
as usual.
5. Press or to scroll to Done, then press MENU/SELECT. To exit without
making changes, press CANCEL.
Christine Smith
>Edit
Copy to 1-touch
Delete
32/50
Enter Name
Christine Smith_
Enter Number
8005959511_
Select to:
Done