User`s manual

55
Edit the one-touch key
1. When the deskset is idle, press MENU/SELECT.
2. Press or to scroll to One Touch, then press
MENU/SELECT or /SKIP.
3. Press or to scroll to View, then press
MENU/SELECT or /SKIP.
4. Press or to scroll to the desired one-touch location.
5. Press MENU/SELECT to select Edit.
6. The screen displays Edit Number. Use the dialing keys to
edit the number.
• Press DELETE to delete a digit.
• Press /REPEAT or /SKIP to move the cursor to the left or right.
• You can include a pause while storing a dialing sequence that requires
one during actual dialing. Press or to choose Add pause, then press
MENU/SELECT. A P appears on the screen.
• Store a signal for switching to temporary tone signaling. If you have dial
pause (rotary) service, this signal is required for some special services.
Press or to choose Send tone, then press MENU/SELECT. A T appears
on the screen. All numbers you enter after this will send touch-tone signals
during dialing.
• You can store the flash signal required by some special services as part of a
dialing sequence. Press or to choose Add flash, then press
MENU/SELECT. An F appears on the screen. Continue storing the number
as usual.
7. Press or to scroll to Done, then press MENU/SELECT to save the setting.
Delete an one-touch key
1. When the deskset is idle, press MENU/SELECT.
2. Press or to scroll to One Touch, then press
MENU/SELECT or /SKIP.
3. Press or to scroll to View, then press
MENU/SELECT or /SKIP.
4. Press or to scroll to the desired one-touch location.
5. Press /SKIP to scroll to Delete, then press
MENU/SELECT.
6. The deskset displays Delete memory? Press
MENU/SELECT to confirm. To exit without making changes,
press CANCEL.
Telephone operation
One touch
One Touch #18
18005959511
Edit
Edit Number:
18005959511_
Select to:
Done
One Touch #18
18005959511
Delete
Delete
memory?