User`s manual

44
Telephone operation
Redial
The last 10 telephone numbers dialed (up to 30 digits) are stored in system
memory. If there is a cordless handset registered to this deskset, the redial
memory is shared between the deskset and its registered cordless handset.
To view the 10 most recently dialed numbers
1. Press AUTO REDIAL to enter the redial list and display the most recently
called number.
2. Press or to view other recently called numbers.
3. Press CANCEL to exit the redial list.
To redial a number
When the desired number displays on the screen:
• Lift the handset.
-OR-
• Press SPEAKER or HEADSET.
To override automatic line selection, press LINE 1-LINE 4 for the desired line,
then lift the handset.
To copy a redial entry to directory
1. Press AUTO REDIAL to enter the redial list and display the most recently
called number.
2. Press or to view other recently called numbers.
3. Press /REPEAT or /SKIP to choose Copy to DIR, then press MENU/SELECT.
4. The deskset displays Enter Name. Use the dialing keys to enter the name
(up to 15 characters).
• Press /REPEAT or /SKIP to move the cursor to the left or right.
• Press DELETE to delete a character.
5. Press MENU/SELECT to save. The deskset displays Enter Number. Use the
dialing keys to enter the number (up to 30 digits).
• Press DELETE to delete a digit.
• Press /REPEAT or /SKIP to move the cursor to the left or right.
• You can include a pause while storing a dialing sequence that requires
one during actual dialing. Press or to choose Add pause, then press
MENU/SELECT. A P appears on the screen.
• Store a signal for switching to temporary tone signaling. If you have dial
pulse (rotary) service, this signal is required for some special services.
Press or to choose Send tone, then press MENU/SELECT. A T appears
on the screen. All numbers you enter after this will send touch-tone signals
during dialing.