User`s manual

28
Network setup (continued)
7. Press MENU/SELECT to proceed. The screen displays
Router/Gateway: XXX.XXX.X.XXX. Use the dialing
keys to enter a specific gateway.
• Press DELETE to delete a digit.
• Press # to add a dot.
• Press /REPEAT or /SKIP to move the cursor to
the left or right.
8. Press MENU/SELECT to save. The screen displays
IP obtained: XXX.XXX.X.XXX Check network info?
Press MENU/SELECT to read the network info, or press
CANCEL to return to the main menu.
• If the IP entered is invalid, the screen displays
IP is invalid. briefly, and then returns to the
Enter static IP screen.
9. Reboot the deskset to update the IP.
Discovery method
Use this feature to change the connection mode of the deskset when you
changed to a different Ethernet switch or router. By default, the discovery
method is set to Mode B.
To change the discovery method:
1. When the deskset is idle, press MENU/SELECT.
2. Press or to scroll to System Setup, then press
MENU/SELECT or /SKIP.
3. Press or to scroll to Network Setup, then press
MENU/SELECT or /SKIP.
4. Press or to scroll to Discovery method, then
press MENU/SELECT or /SKIP.
5. Press or to scroll between Mode A or
Mode B (Default), then press MENU/SELECT or
/SKIP to save the setting. To exit without making
changes, press CANCEL.
Getting started
System setup
IP obtained:
192.168.1.3
Check
network info?
Router/Gateway:
192.168.1._
<’#’ = Add dot>
Network Setup
Auto set IP
Set static IP
>Discovery Method
Discovery Method
Mode A
>Mode B (Default)