User`s manual

11
Getting started
Deskset installation
4. Connect the Ethernet cable and power adapter as shown below.
NOTES:
• Use only the power adapter supplied with this product. To order a replacement power adapter,
visit our website at businessphones.vtech.com or call 1 [phone]. In Canada, please
dial 1 [phone].
• If you want to use an occupied Ethernet wall jack, use the PC port on the deskset as an Internet pass-
through. For details, see Use the existing Ethernet wall jack on page 8.
Router
Plug the large end
of the deskset
power adapter into
an electrical outlet
not controlled by a
wall switch.
Route the Ethernet
cable through the
slots.
Route the power
cord through the
slots.
Plug the small end
of the deskset power
adapter into the power
jack at the back of the
deskset.
6
Plug one end of the
Ethernet cable into the
Ethernet port (
Use only
Supplied
Adapter
L4 L3/4 L2 L1/2
5.1
MS2085 Engraving:
MS2015 Engraving:
Use only
Supplied
Adapter
) at the
back of the deskset.
Plug the other end of the
Ethernet cable into the
Ethernet switch or router
connecting to your console.
Ethernet switch/
Router