User`s manual

21
Screen turns on, then
immediately off.
Battery power
is low.
Connect the unit to a wall outlet
using the included USB cable and
AC adapter. A green light on the unit
will turn on to indicate charging is in
progress. When the battery is fully
charged, the light will turn off.
No picture (or
incorrect picture)
displays on screen, and
pressing the Power
button has no effect.
Battery power
is low.
Connect the unit to a wall outlet
using the included USB cable and
AC adapter. A green light on the unit
will turn on to indicate charging is in
progress. When the battery is fully
charged, the light will turn off.
The unit needs
to be restarted.
Make sure the unit is off by holding
the power button down for 10
seconds and then releasing it. Touch
the Power button again for 3 seconds
to power the unit on.
There is picture on
screen, but the unit is
not responding.
The unit needs
to be restarted.
Make sure the unit is off by pressing
the power button for 10 seconds
and then release it. Hold the Power
button again for 3 seconds to power
on the unit.
No Wi-Fi network can
be detected.
The unit needs
to be reset.
Restore the unit to factory settings
by holding the LEFT key, UP key and
HELP key at the same time while
turning the power on. You will see
a factory reset confirmation screen.
Touch Yes to confirm that you want
to reset the unit. All user data will be
lost after a factory reset.
"Safe mode" appears
at the bottom-left
corner of the screen."
The unit is in
Safe Mode.
Power off the unit by pressing the
power button for 3 seconds, and then
touch the on-screen "Power off" pop-
up window. Power on the unit again
by holding the power button for 3
seconds. Make sure not to press the
"Menu" key while turning the power
on or off.
The unit will not
charge.
The power
source is
not properly
connected.
Make sure the unit is plugged in
to a wall outlet using the included
USB cable and AC adapter.