User`s manual

• Thesupplyterminalsarenottobeshort-circuited.

• Thetoyisnottobeconnectedtomorethantherecommendednumber

of power supplies.

• Donotdisposeofbatteriesinfire.

NOTE: When InnoTab

is running on

batteries, you may see this icon appear on the

screen . This indicates that battery power

is low, and you should replace the batteries

soon. Battery time remaining once the icon

first appears is approximately 10-30 minutes,

depending on the type of batteries in use.

After that, InnoTab

will show the very low battery screen for 3 seconds,

and then will turn off automatically.

To preserve battery life, InnoTab

will shut down automatically when there

is no input for 8 minutes.

AC Adaptor

•Useastandard7.5V 400mA or 9V 300mA AC/DCadaptor.

We recommend the use of a VTech

7.5V400mA/9V300mAAC/DC

adaptor.

 UsingaVTechadaptor(AC/DC7.5V400mAor9V300mA)thatcomplies

withUL697orcUL697isrecommended.

•Makesurethetabletisturnedoff.

•PlugtheadaptorintotheACAdaptorJackonthetopofInnoTab

•Plugtheadaptorintoawallsocket.

NOTE: The use of an adaptor will override the batteries. When the toy

is not going to be used for an extended period of time, unplug

the adaptor.