Operation Manual

• Donotmixbatteriesofdifferenttypes:alkaline,standard(carbon-zinc),

orrechargeable(Ni-MH).

• Onlybatteriesofthesameorequivalenttypeasrecommendedareto

be used.

• Batteriesaretobeinsertedwiththecorrectpolarity.

• Exhaustedbatteriesaretoberemovedfromthetoy.

• Thesupplyterminalsarenottobeshort-circuited.

• Thetoyisnottobeconnectedtomorethantherecommendednumber

of power supplies.

• Donotdisposeofbatteriesinfire.

NOTE: When InnoTab

3 is running on

batteries, you may see this icon appear on

the screen . This indicates that battery

power is low, and you should replace the

batteries soon. Battery time remaining once

the icon first appears is approximately 10-30

minutes, depending on the type of batteries in use. After that, InnoTab

3 will show the very low battery screen for 3 seconds, and then will turn

off automatically.

To preserve battery life, InnoTab

3 will shut down automatically when there

is no input for a few minutes.

AC Adaptor

•Using a VTech

 adaptor (AC/DC 7.5V) that complies with EN61558 is

recommended.

•Makesurethetabletisturnedoff.

•Plugtheadaptor(soldseparately)intotheACadaptorjackonthetopof

InnoTab

•Plugtheadaptorintoawallsocket.

NOTE: The use of an adaptor will override the batteries. When the toy

is not going to be used for an extended period of time, unplug

the adaptor.