Operation Manual

StylusFastener Usethestylusstringtoattachthestylusto

this fastener.

Slide this switch to open the battery

doors. Always replace the InnoTab

battery doors after changing batteries.

microSD Card Slot Insert a microSD memory card (not

included).

(NOTE: InnoTab

3 is compatible

with microSD memory cards up to 32GB.)

Battery Compartments Insert 4 “AA” batteries. For battery installation

instructions, please see the next section.

How to Attach the Stylus

Tie one end of the stylus string to the stylus and the other end to the stylus

fastener on the InnoTab

Battery Installation

•Makesurethetabletisturnedoff.

•Locatethebatterydoorlockslidingswitchonthe

back of the tablet. Slide the switch to open the

battery covers, then remove the covers.

•Insert4“AA”batteriesasshowninimage2.

•Makesuretoreplacethebatterycovers.

Battery Notice

• Non-rechargeablebatteriesarenottoberecharged.

• Standardsize(AA)rechargeablebatteriesaretoberemovedfromthe

toy before being charged (if removable).

• Rechargeablebatteriesareonlytobechargedbyanadultorbychildren

8 years or older.

• Donotmixoldandnewbatteries.

Battery Door Lock Sliding

Switch