User`s manual

5
• Onlybatteriesofthesameorequivalenttypeasrecommended
are to be used.
• Batteriesaretobeinsertedwiththecorrectpolarity.
• Exhaustedbatteriesaretoberemovedfromthetoy.
• Thesupplyterminalsarenottobeshort-circuited.
• Thetoyisnottobeconnectedtomorethantherecommendednumber
of power supplies.
• Donotdisposeofbatteriesinfire.
NOTE: When InnoTab
®
2 Baby is running on batteries, you
may see this icon appear on the screen . This indicates
that battery power is low, and you should replace the
batteries soon. Battery time remaining once the icon first
appears is approximately 10-30 minutes, depending on the
type of batteries in use. After that, InnoTab
®
2 Baby will show
the very low battery screen for 3 seconds, and then will turn
off automatically.
To preserve battery life, InnoTab
®
2 Baby will shut down
automatically when there is no input for a few minutes.
AC Adaptor
•Using a VTech
®
adaptor (AC/DC 7.5V 400mA or 9V 300mA) is
recommended.
•Makesurethetabletisturnedoff.
•Plug the adaptor (sold separately) into the AC adaptor jack on the top of
InnoTab
®
2 Baby.
•Plugtheadaptorintoawallsocket.
NOTE: The use of an adaptor will override the batteries. When the toy is not
going to be used for an extended period of time, unplug the adaptor.
G
E
T
T
I
N
G
S
T
A
R
T
E
D