User`s manual
25
USB connection
window does not pop
up after connecting to
computer.
Poor USB cable
connection.
Securely connect the USB cable
to InnoTab
®
2 Baby and the
computer.
Connection is running
through USB hub.
Connect the InnoTab
®
2 Baby
directly to the computer, without
using a hub.
Touch screen is
inaccurate or it is
impossible to select
the correct icon on the
screen.
Touch screen requires
calibration.
Turn the InnoTab
®
2 BabyOFF.Then
hold
, and down when
turning the InnoTab
®
2 Baby ON.
Follow the steps on the screen.
Inserted an SD card
(not included), but the
tablet cannot recognise
it.
SD card format is not
FAT32.
Format the SD card to FAT32 on
your computer.
Files copied to the
tablet's internal
memory disappeared.
The tablet's memory was
not formatted to FAT32.
If formatting the memory is
necessary, make sure it is
formatted to FAT32.
The Baby Signs
®
videos
are missing.
The program was reset,
and the videos were
deleted.
Connect your tablet to Learning
LodgeNavigator
®
to reinstall the
videos.
If your InnoTab
®
2 Baby does not respond to an inserted cartridge, please carefully
try the following:
• Removeallbatteriesandunplugallwiring.
• Useacottonswabdippedinrubbingalcoholoranalcohol-basedwindowcleaner
to gently clean the contact area of the cartridge slot.
• Ifnecessary,dryallthecleancontactareaswithasoft,lint-freecloth.
• Pleasemakesurethatallpartsarecompletelydrybeforerestoringpower.
Static electricity may cause the InnoTab
®
2 Baby to malfunction. In some cases, the
game play score stored in the tablet memory may be lost. In cases where InnoTab
®
2 Baby is malfunctioning due to static electricity, reset the tablet by removing and
reinstallingthebatteries,orbyunpluggingandrepluggingtheACadaptor.Or,ifthe
static electricity malfunction occurred during the downloading process, disconnect
theUSBcable,deletethecorruptedfile,andresetthetabletasdescribedabove.
ThenreconnecttheUSBcableandrestartthedownloadprocess.