Owner's Manual

4
Battery Compartment Insert 4 AA batteries (not included). For battery
installation instructions, please see the next
section.
InnoTab
®
Cartridge Port Insert an InnoTab
®
cartridge (sold separately) into
this slot to play.
Brightness Button Press this button to adjust the screen brightness.
Slide this
switch to open the battery doors.
Always replace the InnoTab
®
3 Baby battery
doors after changing batteries.
microSD Card Slot Insert a microSD memory card (not included).
(NOTE: InnoTab
®
3 Baby is compatible with
microSD memory cards up to 32GB.)
Headphone Jack Use
this to connect headphones (sold separately).
For safety, we do not recommend using headphones
until your child is 3 years or older.
USB Port Plug the included USB cable into this USB port
to connect the tablet to your computer.
Battery Installation
•Makesurethetabletisturnedoff.
•Useacoinorascrewdrivertounlockandremovetheprotectivecase.
•Locatethebatterydoorlockslidingswitchonthebackofthetablet.Slidethe
switch to open the battery covers, then remove the covers.
•Insert4AAbatteriesasshowninimage.
•Makesuretoreplacethebatterycovers.
•Replacetheprotectivecover.Useacoinorascrewdrivertosecurethecover.
Battery Notice
• Non-rechargeablebatteriesarenottoberecharged.
• Standardsize(AA)rechargeablebatteriesaretoberemovedfromthe
toy before being charged (if removable).
G
E
T
T
I
N
G
S
T
A
R
T
E
D
Battery Door Lock Sliding
Switch