Owner's Manual

24
No picture (or incorrect
picture) on screen, and
pressing the Power
button has no effect.
Program needs to be
reset.
Disconnect all power supplies
(batteries), then reconnect all
power supplies.
Press the Power button.
Remove the cartridge, clean it if
necessary, and then re-insert it
into the InnoTab
®
3 Baby.
No screen display after
pressing Power button.
Battery power low. Replace the battery.
Incomplete battery
installation.
Make sure to install all batteries in
the battery compartment.
No AC adaptor power Securely connect the AC adaptor
or car adaptor to both the
InnoTab
®
3 Baby and the power
source.
The cartridge icon does
not appear on desktop.
Poor cartridge
connection.
Remove the cartridge, clean it if
necessary, and then re-insert it
into the InnoTab
®
3 Baby.
USB connection
window does not pop
up after connecting to
computer.
Poor USB cable
connection.
Securely connect the USB cable
to InnoTab
®
3 Baby and the
computer.
Connection is running
through USB hub.
Connect the InnoTab
®
3 Baby
directly to the computer, without
using a hub.
Touch screen is
inaccurate or it is
impossible to select
the correct icon on the
screen.
Touch screen requires
calibration.
Turn the InnoTab
®
3 BabyOFF.Then
hold
, and down when
turning the InnoTab
®
3 Baby ON.
Follow the steps on the screen.
Inserted a microSD
card (not included),
but the tablet cannot
recognise it.
microSD card format is
not FAT32.
Format the microSD card to FAT32
on your computer.
Files copied to the
tablet's internal
memory disappeared.
The tablet's memory was
not formatted to FAT32.
If formatting the memory is
necessary, make sure it is
formatted to FAT32.
T
R
O
U
B
L
E
S
H
O
O
T
I
N
G