Operating instructions

11
Basic Operation
Telephone Operation
FORWARDED CALL
SENDING CALL
DIAL MODE: TONEDIAL MODE: TONE
DIAL MODE: TONEDIAL MODE: TONE
DIAL MODE: TONE
Default setting: Tone
HS2 will ring and show:
Set Dial Mode
If you have touch tone service, the phone is ready to use as soon as the battery is
charged. If you have pulse (rotary) service, you'll need to change the dial mode.
1. Press PROG.
2. Press Until screen displays DIAL MODE & SETTING.
3. Press select. The current setting blinks.
4. Press
to display tone or pulse.
5. Press SELECT.
Temporary Tone Dialing
If you have pulse (rotary) service, you can change from pulse to tone dialing
during a call by pressing * (TONE). This is useful if you need to send touch tone
signals for access to telephone banking or long distance services.
1. Dial the number.
2. Press * (TONE). Buttons pressed after this send touch tone signals.
3. After you hang up, the phone automatically returns to pulse service.
Call Forward
An external call can be forwarded from one handset (HS1) to the other handset
(HS2) by following these steps:
1. While on a call, press SELECT on HS1 to forward the call to HS2. HS1 will
show:
NOTE: If the HS2 cannot be found, HS1 will generate a sad tone and continue
the call automatically. Before HS2 answers, HS1 can press PHONE/FLASH (
)
to cancel the forward function and continue the external call.
2. Press PHONE/FLASH (
) on HS2 to answer the forwarded call. HS1will
return to the idle mode.
NOTE: If HS2 doesn’t respond within 30 seconds, HS1 will start ringing until PHONE/
FLASH (
) is pressed to pick up the returned call. If it is not answered within another 30
seconds, the external call will end automatically.