User`s manual

29
no
i
tare
p
O
c
i
saB
Headset Operation
Your ia 5851 handset is equipped with a 2.5mm headset jack for use with an
optional
accessory headset for handsfree operation. If you choose to use the
headset
option, you must obtain an optional accessory headset, which is
compatible
with the ia 5851.
To
purchase a Headset, visit us on the web at www.vtechcanada.com or
call
VTech Customer Service at 1-800-267-7377.
Once
you have a compatible 2.5mm headset, locate the headset jack on the
ia
5851 handset. Connect the plug on the headset cord to the jack (under a
small
rubber flap) on the cordless handset. The plug should fit securely. Do
not
force the connection.
NOTE:
Whenever
a compatible headset is
connected
to the cordless handset, the
microphone
on the handset will be muted.
This
is done to limit the effect of background
noise
.
Belt
Clip
The ia
5851 is also equipped with a
detachable
belt clip. Align the pins on the
inside
edge of the clip with the notches on
the
sides of the handset. The belt clip
should
snap securely into place. Do not
force
the connection.