User`s manual

24
Basic Operation
“Set Audible Message Alert ” When message alert is turned on, the base beeps
Off
*
once every 10 seconds when new messages
On have been received.
“Set Announce Only” When you turn announce only on, callers hear
Off
*
your announcement, but cannot leave a message.
On
“Set Base Ringer” Turn the base ringer on or off.
On
*
Off
“Set Number of Rings” Choose how many times the phone will ring
before the system answers a call. With toll saver
active, the system answers after two rings when you
have new messages and after four rings when
you have no new messages.
NOTES:
1. To advance the remote access code by increments of 10, press and hold
SELECT .
2. You can exit feature setup at any time by pressing a MAILBOX button.
Setting Up Your Answering System
You can set up one feature at a time, or you can set the features one after the
other, in sequence.
1. Make sure the answering system is ON.
2. Press MENU until the system announces the feature you want to set.
Refer to the Feature Summary below for a description of the features and
choices.
3. Press SELECT until the system announces the desired setting.
4. Press TIME/SET.
5. Press MENU to move on to the next feature, or press a MAILBOX button to
exit feature setup.
Feature Summary
Default settings indicated by
*
.
System announces: Description/directions:
“Set Security Code” Use SELECT to choose the remote access code you
will use to access answering system functions re-
motely. You can select any two digit code between 40
to 99.
System announces: Description/directions:
Answering System Operation
50
*
2
4*
6
Toll Saver