USER’S MANUAL ia5829 Model: ia5829 8 5.GHz Cordless Phone System FEATURING: Caller ID * / Call Waiting • 45 Name & Number Caller ID Memory • Headset Compatible (2.5mm) Te c h n o l o g y www.vtechcanada.
Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4.
Important Safety Instructions A. When the power supply cord or plug is damaged or frayed. B. If liquid has been spilled onto the product. C. If the product has been exposed to rain or water. D. If the product does not operate normally by following the operating instructions.
Before You Begin Enhanced 5.8GHz Technology - Dual band transmission combines the best of 5.8GHz and 900MHz technologies, providing enhanced performance over standard cordless telephones. Parts Check List 1. 2. 3. 4. Base Unit Handset Base Power Adaptor Telephone Line Cord 5. 6. 7. 8. Battery Belt Clip User’s Manual Wall Mount Bracket To purchase replacement batteries, visit us on the web at www.vtechphones.com or call VTech Communications, Inc. at 1-800-595-9511.
The Handset Layout 1 2 3 4 9 10 5 11 12 6 1. 2. 3. 4. 5. 6. 7. 8. 7 13 8 14 Antenna Earpiece LCD Left and Right Arrow Keys Phone/Flash Key Dialing Keys (0-9,*,#) Chan/Delete Key Microphone 9. 10. 11. 12. 13. 14.
The Base Unit Layout 3 1 2 4 5 1. Message Light 2. Locate Handset Key 3. Charging/In use Light 4. Telephone Line Jack 5.
Getting Started Setup Connecting Power to Base Unit 1. Choose a location for the base near an electrical outlet and a telephone jack. This phone requires a modular telephone jack and a standard electrical outlet (110V AC) not controlled by a wall switch. Connect the power cord Standard electrical outlet 2. Plug the DC connector to the base. Plug the AC adaptor into an electrical outlet. Installation and Charge of Battery 1. Install the battery. Use only VTech batteries.
2. If the phone will not be used for long periods of time, remove the battery to prevent possible leakage. NOTE: Install the base unit away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. Low Battery Indication: If the battery power becomes low, a low-battery icon will be shown at the lower left corner of handset display. The handset will beep until you place the handset in the charger.
Getting Started Setup Check for Dial Tone After the battery is charged, pick up the handset and press PHONE/FLASH. You should hear a dial tone. Set Date and Time If you subscribe to caller ID service, the date and time will be set automatically with the first incoming call. If you do not have caller ID service, you can set the date and time manually: • • • • • • • Press PROG on the handset. Press or until DATE/TIME is displayed. Press SELECT. The month is flashing.
Telephone Operation Operation SELECT / CID • Use SELECT in conjunction with PROG during handset programming. • While on a call, press to decrease the volume. A double beep will sound when you reach the minimum setting. • While phone is not in use, press to display caller ID information. • While entering number or letters, press to delete last character entered. / • While on a call, press to increase the volume. A double beep will sound when you reach the maximum setting.
Telephone Operation Basic Operation Base Operation In Use/Charging Indicator Message Waiting Indicator • Flashes slowly when the handset is in use. • Flashes rapidly when a call is on hold. • Glows steadily when the handset is charging in its base. • If you subscribe to telephone company voice mail with a visual message waiting signal, this light flashes, and MESSAGES WAITING displays on the handset screen when you have voice mail waiting. Page/Handset Locator • Press to page the handsets.
Telephone Operation Handset Ringer Style/Battery Save You can select from four different handset ringer styles, or turn the ringer off and extend the battery life. 1. Make sure the handset is off. 2. Press PROG. 3. Press until the screen displays RINGER: and the current selection. 4. Press SELECT. The current setting blinks, and you will hear a sample of the ring. (off). You will hear a sample 5. Press or to select RINGER: 1, 2, 3, 4 or of each ring. 6. Press SELECT to choose the displayed ringer setting.
Telephone Operation MESSAGES 5/01 WAITING 5:40PM Clear Message Waiting Alert If you wish to manually turn off the message waiting light: 1. Press PROG. 2. Press or until screen displays MESSAGES WAITING. 3. Press SELECT, the screen displays: Basic Operation LIGHT OFF: YES 4. Press or to change from YES or NO. 5. Press SELECT to choose the desired setting. You’ll hear a confirmation tone. Display Screen Messages Screen Displays: When: ** RINGING ** There is a call coming in. CONNECTING...
Speed Dial Memory You can store up to nine telephone numbers with names (up to 15 characters and 24 digits in each location) into the speed dial memory locations you assign (1 through 9). You can also store telephone numbers with names alphabetically in the directory. See Telephone Directory for instructions. NOTES: • The entries you store in speed dial memory will be marked with 01 through 09 in the telephone directory. • Press (off) at any time to exit memory mode. 1. Press PROG on the handset. 2.
Telephone Memory Basic Operation 6. When you finish entering the name, press SELECT or PROG. The screen displays ENTER NUMBER. 7. Enter the telephone number. Use to backspace and make corrections. Press REDIAL/PAUSE to store a pause in the dialing sequence. -ORPress REDIAL/PAUSE to display the last number dialed from this phone. 8. Press SELECT or PROG to store your entry. The screen displays DISTINCT RING? and the current setting. 9. Press or to change the setting.
Telephone Memory Dial a Memory Number 1. Press and hold the memory location key (1 through 9) of the entry you wish to dial. (phone) / FLASH to dial the displayed memory number. 2. Press Reassign Locations in Memory 1. Press and hold the memory location key (1 through 9) of the entry you wish to reassign. 2. When the screen displays the entry you want to reassign, press SELECT. Then press until SPEED flashes. 01 3. Press SELECT. The screen displays ENTER 1-9. 4.
Telephone Directory Your ia 5829 can store 20 (including nine speed dial entries) telephone numbers with names (up to 15 characters for the name and 24 digits for the number in each location). NOTE: Press (off) at any time to exit directory. Basic Operation Store a Number/Name in the Directory 1. Press PROG. The screen displays DIRECTORY. 2. Press SELECT. The screen displays ENTER NAME. 3. Using the chart below, enter up to 15 characters for the name you’re storing with the number.
Telephone Directory first ring. Choose N for a normal ringing pattern. 8. Press SELECT or PROG to confirm your selection. If you chose Y, a D will be displayed with the directory entry. Edit a Number/Name Stored in the Directory 1. Press . The screen displays DIRECTORY. 2. Press or to scroll alphabetically through the entries stored in the directory. -ORPress the dial pad key for the first letter of the entry you want to edit. 3. When the screen displays the entry you want to edit, press SELECT.
Telephone Directory Dial a Number from the Directory 1. Press . The screen displays DIRECTORY. or to scroll alphabetically through entries stored in directory. 2. Press -ORPress the dial pad key for the first letter of the entry you want to dial. (phone)/FLASH. 3. When the number you want to dial is displayed, press Basic Operation Move a Number/Name to the Memory 1. Press . The screen displays DIRECTORY. 2. Press or to scroll alphabetically through directory.
Caller ID Operation Caller’s name VTech * 800-595-9511 5/01 5:40 PM Date of call Time of call OLD 28 Party has called 2 or more times Caller’s telephone number Position of call in call history indicate whether the record is new or old Your ia 5829 can store up to 45 calls in its caller ID (CID) memory. The most recent call will have the highest number. When the memory is full, the oldest call will be deleted to make room for new incoming call information.
Caller ID Operation Dial a Displayed Number 1. Locate the record in call history that you want to dial. 2. If you wish to change how the number is dialed, press #. The screen displays alternate dialing sequences available for this call (area code + number; 1 + area code + number; number only; 1+ number). 3. Press SELECT. Press until DIAL flashes. DIAL PROGRAM 800-595-9511 5/01 5:40PM OLD 28 Basic Operation 4. Press SELECT again. The number is automatically dialed. — OR — (phone)/FLASH.
Headset Operation Your ia 5829 handset is equipped with a 2.5mm headset jack for use with an optional accessory headset for handsfree operation. If you choose to use the headset option, you must obtain an optional accessory headset, which is compatible with the ia 5829. To purchase a headset, visit us on the web at www. vtechcanada.com or call VTech Customer Service at 1-800-267-7377. Once you have a compatible 2.5mm headset, locate the headset jack on the ia 5829 handset.
Maintenance Taking care of your telephone Your cordless telephone contains sophisticated electronic parts, so it must be treated with care. Avoid rough treatment Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with wet hands. Do not install your base unit near a sink, bathtub, or shower.
In Case of Difficulty If you have difficulty operating your phone, the suggestions below should solve the problem. If you still have difficulty after trying these suggestions, visit us on the web at www.vtechphones.com or call VTech Communications at 1-800-595-9511. In Canada, call VTech Telecommunications Canada Ltd. at 1-800-267-7377. The phone doesn't work at all • • • Make sure the power cord is plugged in.
In Case of Difficulty You hear noise in the Handset, and none of the keys or buttons work • Make sure the power cord is plugged in. Common cure for electronic equipment Additional Information If the unit does not seem to be responding normally, then try putting the handset in the base. If it does not seem to respond, do the following (in the order listed): 1. Disconnect the power to the base. 2. Disconnect the handset battery, and spare battery, if applicable. 3. Wait a few minutes. 4.
Warranty Statement What does this limited warranty cover? • The manufacturer of this VTech product, VTech Communications, warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the product and all accessories provided by VTech in the sales package (“Product”) are free from material defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with operation instructions.
Warranty Statement How do you get warranty service? • To obtain warranty service in the United States of America, call 1-800-595-9511 for instructions regarding where to return the Product. Before calling for service, please check the user’s manual. A check of the Product controls and features may save you a service call.
FCC, ACTA and IC Regulations This equipment complies with Parts 15 of the Federal Communications Commission (FCC) rules for the United States. It also complies with regulations RSS210 and CS03 of Industry and Science Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
FCC, ACTA and IC Regulations 1. Product identifier and REN information The label on the back or bottom of this equipment contains, among other things, an identifier indicating product approval and the Ringer Equivalence Number (REN). This information must be provided to your local telephone company upon request. For equipment approved prior to July 23, 2001, the product identifier is preceded by the phrase “FCC Reg No.” and the REN is listed separately.
FCC, ACTA and IC Regulations feature doesn’t work. b. This feature is provided only as a convenience, and the manufacturer assumes no responsibility for customer reliance upon the memory feature. c. Testing the emergency telephone numbers you have stored is not recommended. However, if you do make a call to an emergency number: • You must remain on the line and briefly explain the reason for the call before hanging up.
Technical Specifications FREQUENCY CONTROL WEIGHT Crystal controlled PLL synthesizer Handset: 159g (without battery pack) TRANSMIT FREQUENCY Base: 205 gram(without adaptor and wallmount) Base: 912.75 - 917.10 MHz Handset: 5863.80 - 5872.50 MHz POWER REQUIREMENTS RECEIVE FREQUENCY Base: 5863.80 - 5872.50 MHz Handset: 912.75 - 917.10 MHz CHANNELS 3.
VTECH TELECOMMUNICATIONS LTD. A member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications, Inc. Beaverton, Oregon, 97008 Distributed in Canada by VTech Telecommunications Canada Ltd., Richmond, B.C. V6X 1Z9. Copyright 2004 for VTECH TELECOMMUNICATIONS LTD.
Table of Contents Important Safety Instructions......................................................................................1 Before You Begin ..............................................................................................................3 Parts Check List ..................................................................................................................3 The Handset Layout.................................................................................................
Table of Contents About Call History .............................................................................................19 Review Call History .........................................................................................19 Delete Records from Call History..............................................................................19 Dial a Displayed Number...................................................................................20 Store a Call History Record in the Directory.
Congratulations on your purchase of this VTech product NEED HELP? Our representatives are here to help you with any questions concerning the operation of this product, available accessories, or any other related issues. Call Toll Free: 1-800-595-9511 In Canada, Call: 1-800-267-7377 or visit our website at www.vtechcanada.