User`s manual

72
Directory
Creating a new directory entry (continued)
Using the telephone base
1. Press the MENU softkey when the telephone
base is in idle mode.
2. Press the SELECT softkey to enter the Directory
menu.
3. Press the NEW softkey to create a new directory
entry.
4. Enter a name (up to 16 characters) by using the
dial pad keys (0-9). See the character chart on
page 70.
• Each time a dial pad key is pressed, the
characters on that key will be displayed in
the highlighted character in the order of
the number of key presses. For instance,
for the letter a, press the 2 dial pad key
five times.
• Press the LEFT and RIGHT NavKeys to move
the cursor left and right.
• Press the ERASE softkey to backspace and
delete a highlighted character.
5. Press the DONE softkey to store the name.
6. Enter the telephone number (up to 32 digits) by
using the dial pad keys (0-9).
• Press the LEFT and RIGHT NavKeys to
move the cursor left and right.
• Press the ERASE softkey to backspace and
delete a highlighted digit.
• Press and hold # until a P appears on the
display to enter a two-second pause.
7. Press the DONE softkey when you have finished
entering the telephone number.
8. Press the SAVE softkey to store the entry.
–OR–
Press the UP and DOWN NavKeys to highlight to highlight highlight
and edit the name or number (see steps 4 and
5), then press the SAVE softkey to store the
entry.
NOTES:
• Press CANCEL at
anytime to discard any
changes and return to
the Directory menu.
• While creating or editing
an entry, if no keys
are pressed within 60
seconds, changes will
be discarded, and the
display will timeout and
return to the idle screen.