User`s manual

37
System setup
Ringer Melody
You can select from the traditional ringers and
musical polyphonic ringer melodies on each
handset.
Select a ringer melody
1. Press MENU/SELECT in idle mode to enter the
main menu.
2. Press the UP and DOWN NavKeys to select
Ringers, then press MENU/SELECT to enter the
Ringers menu.
3. Press the UP and DOWN NavKeys to highlight:
• Ringer for HOME - set the ringer volume and
melody for the HOME line.
• Ringer for CELL 1 - set the ringer volume
and melody for the first connected cellular
phone on the Active Devices list (page 27).
• Ringer for CELL 2 - set the ringer volume and
melody for the second connected cellular
phone on the Active Devices list (page 27).
4. Press MENU/SELECT.
5. Press the DOWN NavKey to highlight Ringer
Melody, then press MENU/SELECT. The current
ringer melody will be played.
6. Press the UP and DOWN NavKeys to highlight
a ringer. You will hear a sample of each ringer
melody when highlighted.
7. Press the SET softkey or MENU/SELECT to save
the setting.
Delete a ringer melody
1. Follow steps 1 through 6 in the above section.
2. Press the DELETE softkey. Delete Ringer? will
appear on the display.
3. Press the YES softkey to delete the melody.
NOTES:
• You can only permanently delete the polyphonic ringer melodies.
The traditional ringers (melodies 1 through 8, with the icon)
cannot be deleted.
• Deleting a ringer melody increases the available record time for your
own recordable ringer(s) (page 38).
NOTE: Selecting,
recording, or deleting a
ringer melody on one
handset does not affect
the other handset(s) in
the system.
Ringer Volume
Ringer Melody
Ringer for HOME
Delete Ringer?
Ringer Melody
Ringer Melody
Melody 1
 Melody 2
Melody 3
Melody 4
SET
YES
NO
DELETE