User`s manual

32
System setup
Show Handset Name
By default, the handset name is shown on the
display when in idle mode.
To change this setting:
1. Press MENU/SELECT in idle mode to enter the
main menu.
2. Press the UP or DOWN NavKeys to select
Settings, then press MENU/SELECT to enter the
Settings menu.
3. Press the UP and DOWN NavKeys to highlight
Show Handset Name, then press MENU/SELECT.
4. Press the UP and DOWN NavKeys to highlight
On or Off, then press the SET softkey or MENU/
SELECT to save the setting.
NOTE: If you turn off this setting, it will only affect that
handset.
Keypad Tone
By default, the handset beeps when you press a
key.
To turn the keypad tone setting on or off:
1. Follow steps 1 and 2 in the above section.
2. Press the UP and DOWN NavKeys to highlight
Keypad Tone, then press MENU/SELECT.
3. Press the UP and DOWN NavKeys to highlight
On or Off, then press the SET softkey or MENU/
SELECT to save the setting.
Language
By default, the handset language is English. You
can select English, Spanish, or French for all screen
displays.
To change the language setting:
1. Follow steps 1 and 2 in the top section.
2. Press the UP and DOWN NavKeys to highlight
Language, then press MENU/SELECT.
3. Press the UP and DOWN NavKeys to highlight
English, Español or Français, then press the SET
softkey or MENU/SELECT to save the setting.
Set Time
Edit Handset Name
Show Handset Name
Keypad Tone
Language
Settings
Show Handset Name
Off
Show Handset Name
SET
 On
Off
Keypad Tone
SET
 On
Español
Français
Language
SET
 English