Operating instructions

Answering System Operation

Audible Indicators

This system gives you voice prompts for feature op-

erations and voice confirmations when you press a

button or complete an operation.

Turn Answering System On or Off

Press ANSWER ON/OFF to turn the system on or off. When the system is turned

on, you will hear "Answering machine on" and the ANSWER ON/OFF light will be

lit. When the system is off, you will hear "Answering machine off" and the AN-

SWER ON/OFF light will not be lit. The system will answer after 10 rings if it is off,

then announce "Please enter your remote access code" and wait for you to enter your

two digit code to access code. (See Remote Access on page 30 for details.)

Set the Clock

When CL flashes in the message window, you will need to set the correct day

and time at the base.

1. Press TIME/SET. The time and day will be announced, followed by "To begin

setting the clock, press TIME/SET, then press CHANGE to change the setting

or press TIME/SET to continue." Press TIME/SET again. The day will be

announced.

Answering System Operation

2. Press CHANGE until the system announces the

correct day, then press TIME/SET. The system

announces the current hour setting.

3. Press CHANGE until the system announces the

correct hour, press TIME/SET. The system an-

nounces the current minute setting.

4. Press CHANGE to advance the minutes one at

a time.

- OR -

Press and hold CHANGE to advance the min-

utes in increments of 10.

• Press TIME/SET, the system announces the current year.

• Press CHANGE to advance the year one at a time.

-OR-

Press and hold CHANGE to advance the years in increase of 10.

• When the system announces the correct year, press TIME/SET.

5. Press CHANGE until the system announces the correct year, then press

TIME/SET.The system announces the current clock setting.