Operating instructions

21
Basic Operation
Handset Settings
Handset Name (preset to VTECH)
• You can give each handset its own unique
name (such as kitchen or office). The name
is shown in the first line when the handset is
idle. The name can be a up to 16 characters
in length.
• From idle (off) mode, press SEL then
or
to HANDSET NAME.
• Press SEL. The display will show the current set-
ting, for example:
• Press DELETE to backspace then enter the
desired name.
NOTE: The characters are entered in the same
way as for the phonebook, see the table on page
15.
• Press SEL to confirm.
Language (preset to English)
• From the idle (off) mode, press MENU then
or to LANGUAGE.
• Press SEL. Press
or to scroll from English
to French or Spanish.
• Press SEL to confirm.
Dial Type (preset to Tone)
• From idle (off) mode, press MENU then
or to DIAL TYPE.
• Press SEL then
or to scroll to TONE or
PULSE.
• Press SEL to confirm.
NOTE: When the phone is set for pulse dial
mode, it is possible to switch to temporary tone
mode during an ongoing call by pressing *TONE.
Once pressed, tone will be used for rest of the
call. After you hang up, the phone will return to
pulse dialing for the next call.