Telephone Accessories User Manual

www.vtechphones.com
25
Basic operation
Handset settings
• The handset will
not ring when a
call comes in if
ringer volume is
set at the lowest
setting.
Ringer volume
• From the idle (off) mode, press SEL then or until RINGER VOLUME
is shown.
• Press
SEL. The current ringer volume will be shown:
• Press
and or enter a digit (0 through 6) to the desired ringer volume. The
current ring tone will play and the volume bar is increased or decreased each
time the setting is adjusted. At the lowest setting the display will show:
- OR -
• From idle (off) mode, press the
+/- volume control keys on the side
of the handset to directly enter the RINGER VOLUME menu.
• Press
and to the desired ringer volume.
Ring tone
• From the idle (off) mode, press SEL then or until RINGER TONE
is displayed.
• Press
SEL. You can then use or or enter a digit (0 through 9) to
sample the ring tone.
• Press
SEL to conrm.
Key tone
• From the idle (off) mode, press SEL then or to KEY TONE.
• Press
SEL. The current setting will be shown. Press or to scroll to
ON or OFF. When set to ON, the handset will emit a beep whenever a
key is pressed.
• When the desired option is shown, press
SEL.
Handset name (preset to VTECH)
• You can give each handset its own unique name (such as kitchen or
ofce). The name is shown in the rst line when the handset is idle.
The name can be a up to 16 characters in length.
>KEY TONE
LANGUAGE
HANDSET NAME
VTECH_