Telephone Accessories User Manual

www.vtechphones.com
15
Basic operation
Handset operation
INTERCOM ENDED
UNABLE TO CALL
TRY AGAIN
CALL FORWARDED
Intercom (continued)
• Press INT, OFF, or place HS1 or HS2 back in the base or charger
to end the call.
If HS2 is out of range, the screen on HS1 will show NO SIGNAL
CALL ENDED. If HS2 is off, in use or out of range, HS1 will show
UNABLE TO CALL TRY AGAIN.
Call forward
An external call can be forwarded or transferred from the
originating handset (HS1) to the destination handset (HS2).
• While HS1 is on an external call, you can forward the call to
HS2 by pressing and holding INT. CALL FORWARDED will
display on HS1.
• HS2 will begin ringing and display INCOMING CALL.
• Press TALK/FLASH on HS2 to answer the call.
If the forwarded call is not answered within 30 seconds, the
external call will be returned to HS1 and the screen will display
CALL BACK and rings for 30 seconds. If the returned call
is not answered within 30 seconds, the external call will end
automatically .