Operating instructions

7
Getting Started
Setup
Connecting Power to Base Unit
Plug the power adapter into an electrical outlet, and the connector into the bottom of
the base unit.
Installation and Charge of Battery in Handset
1. Remove the battery cover and place the
battery in the compartment with the metal
contacts aligning, as shown in the diagram.
2. Replace the cover by sliding it upwards.
3. If the new battery isn’t already charged,
place the handset in its charger or base
unit, and allow it to charge for at least 12
hours. After the initial charge, a
maintenance charge of 8 hours should be
sufficient.
The original handset that is shipped with your i 5871 system will be
automatically registered to the base. This handset is HANDSET 1.