Introduction EXPAND YOUR i 5853, i 5857, i 5866 OR i 5867 SYSTEMS. YOUR BASE WILL WORK WITH UP TO 8 HANDSETS!!! IMPORTANT: The i 5807 is an Accessory Handset for use with the i 5853, i 5857, i 5866 or i 5867 systems. You must have one of these Base Units in order to use the i 5807 Accessory Handset. This manual is designed to familiarize you with the i 5807 Accessory Handset setup, registration and basic functions.
Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4.
Important Safety Instructions F. If the product exhibits a distinct change in performance. 13. Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of electric shock from lightning. 14. Do not use the telephone to report a gas leak in the vicinity of the leak. 15. Only put the Handset of your telephone next to your ear when it is in normal talk mode.
Getting Started Parts Check List 1. 2. 3. 4. 5. Handset Battery Cells Belt Clip Handset Charger Special Features Guide 6. 7. 8. 9 User's Manual Image Editor Software (CD-ROM) Audio Patch Cable USB Cable To purchase replacement battery cells, call VTech Communications, Inc. at 1-800-5959511. In Canada, call VTech Telecommunication Canada Ltd. at 1-800-267-7377. NOTE: Use only VTech batteries P/N 80-5461-00-00 or equivalent AA NiMH rechargeable batteries.
1 9 2 10 11 12 3 4 ON 5 1 OK ABC 22ABC 0 OPER CT # LE ON E 14 WX YZ 9 WX Z SE R KE EA SP PH 13 MNO 6 MNO TUV 88TUV PQ 7PQ RS RS TONE TONE 7 DEF 3 DEF JKL 55JKL GHI 4 GHI 6 OFF S OU ND 15 16 8 1. Antenna 9. In Use/ Incoming Ringing/ Message LED 2. Earpiece 3. Headset Jack and Audio Patch Cable Jack (2.5mm) 10. LCD Display 4. Soft/Select Key 12. Volume Keys 5. On/Flash Key 13. Softkey 6. Dialing Keys (0-9, *, #) 14. Off/Cancel Key 7. Speakerphone Key 15.
Getting Started Setup Connecting Power to Handset Charger Because the i 5807 is an accessory Handset to the i 5853, i 5857, i 5866 or i 5867, all you need to do is choose the location for your Handset Charger, and plug in the power supply into an electrical outlet. DC 6V CORDLESS TELEPHONE MODEL: 5807 VTECH TELECOMMUNICATIONS LTD. DC 6V 300mA CLASS 2 POWER SOURCE ONLY Installation and Charge of Battery Cells in Handset Follow these steps: 1.
Battery Life Fully charged battery cells provide provides an average talk time of about 8 hours or standby time of 5 days. NOTE: Talk time and standby time may vary depending on operating conditions. Battery Indicator Ten minutes before the battery charge level gets too low to operate the Handset, an empty battery icon will start flashing, five short tones are generated and a LOW BATTERY message is displayed.
Getting Started Registration Registering the i 5807 Handset for the first time After charging, the screen on the Handset will display: If your Base Unit is model number i 5866 or i 5867: 1) Find the Base ID Code on the underside of the Base Unit. 2) Enter the 15-digit Base ID Code into the Handset. If you make a mistake, press the left NavKey to backspace or press the right softkey to erase a character. 3) Press OK to complete the registration process.
Handset Indicators Handset Icons Description Line In Use Indicator • On steady with one or more numbers next to it, indicating which extensions are using the line. For example, 12 indicates that Handset 1 and Handset 2 are on an outside call. • Appears in idle or phone on modes to indicate a parallel set in use. It replaces phone on icon during phone on mode and parallel set is detected. • On when the answering machine is answering an incoming call.
Handset Menu Navigation Keys (NavKey) • Press any NavKey button to display the Main Menu. Press the NavKey buttons (left, right, up and down) to navigate through menus. Press the middle NavKey to select the highlighted menu item. Menu Shortcuts Basic Operation • • When viewing menu options, pressing the corresponding number on the dialing pad will automatically select that item.
Handset Menu new calls count (if you have new calls). To illuminate the screen and read the clock and the new calls count, simply press the volume buttons on the right edge of the handset. From Handset to Handset: • With the Intercom icon highlighted, press the middle NavKey or the left softkey. • Press the up or down NavKey to maneuver to the desired Handset. • Press the middle NavKey, left softkey or the assigned dialing key (1- 8) to confirm.
Handset Menu Basic Operation When prompted to Enter Name, use the digit keys to spell the name. Each press of a key will cause characters to be displayed as follows: Number Key 1 Space Characters (in order) 2 3 A D & B E ’ C F , a d . b e 1 c f 2 3 4 5 G J H K I L g j h k i l 4 5 6 7 M P N Q O R m S n p o q 6 r s 7 8 9 T W U X V Y t Z u w v x 8 y z 9 0 0 * # # Adding Phonebook Entries • From the Handset idle (OFF) mode, press any NavKey button.
Handset Menu • Enter the number you want to store in the Phonebook. Press and hold the # key to insert a pause. If you make a mistake, press the right softkey . When finished, press OK. Basic Operation The screen will display: NOTE: If you do not wish to assign a distinctive ring tone or image to this Phonebook entry, press SAVE now. • If you wish to be alerted to calls from this phone number, you can assign a unique ring tone to this Phonebook entry.
Handset Menu NOTE: For directions on the Picture Download feature, please refer to page 20. • Once you’ve selected a picture, press SAVE. 3 of 11 Basic Operation • Your phonebook entry has been saved and the screen will display: John Smith Pat Johnson Rose 3 of 11 Searching for and Dialing Phonebook Entries • From the Handset idle (OFF) mode, press any NavKey. The Phonebook icon should be highlighted. Press the middle NavKey or left softkey.
Handset Menu • Press the middle NavKey. The screen will display: • Press the EDIT softkey. John Smith 1-604-720-358960 4203589 RINGER: Melody 1 PICTURE: EDIT Press the up or down NavKey to the option you want to edit then enter the corrections as needed. Press the softkey to delete. John Smith 1604720358960420 3589 RINGER: Melody 1 PICTURE: SAVE John Smith • When finished, press the SAVE softkey. The screen will display the edited entry.
Handset Menu Calls Log With this icon highlighted, press the middle NavKey or left softkey to view your Caller ID and Redial options: Basic Operation Review CID Log Clear CID Log Review Redial Clear Redial Move the up or down NavKey to highlight the desired option, then press the middle NavKey or left softkey. You can also press the dialing key assigned to each menu item. The top menu is assigned to dialing key 1 and so on down the menu options.
Handset Menu Set Time (dialing key 2) - This option allows you to set the time to be displayed on the bottom of the idle screen. If you subscribe to Caller ID, the time will be set automatically when your first CID record is received. NOTE: Press the number keys to change the time. Contrast (dialing key 3) - This option allows you to adjust the Handset screen contrast. Language (dialing key 5, preset to English) - This option allows you to change the screen prompts to English, Spanish or French.
Handset Menu Low Battery Tone (dialing key 4) - This option allows you to turn the Low Battery Tone On/Off. Keypad Tone (dialing key 5) - This option allows you to turn the Keypad tones On/Off. Basic Operation Range Tone (dialing key 6) - This option allows you to turn the Range Tone On/Off. Press the NavKeys to navigate to the desired option and make the change, or press the dialing key that is assigned to the icon. For confirmation, press the middle NavKey or the SAVE softkey.
Recordable Ringer Record a Ringer You can easily record a unique ringer to be used as either your Default Ringer or for a Distinctive Ringer assigned to a specific phonebook directory. You can record with either the provided Audio Patch Cord (not the USB cord), or with the Handset microphone. You may record up to 9 unique ringers for a maximum of 10 seconds each. NOTE: Your i 5807 Handset is preset with many musical ringer options (i.e.
Picture Download Download Your Own Image Do you have a favorite image stored in your personal computer that you would like to use as your i 5807 Handset wallpaper or to assign to one of your 50 available phonebook directories? Using the provided Image Editor Software, you can view and convert your image. Once you have selected your file and viewed your image in the software, use the included USB cord to send the converted image directly into the Handset.
Picture Download • Before downloading your image, make sure that the provided USB cord is correctly installed into your computer (using the large connector) and Handset (using the small connector). After you have completed the image editing process, press Send NOTE: Do not leave the USB cord connected to the Handset for an extended period of time. This will drain the battery. NOTE: All preset images in My Pictures can be deleted and replaced by new ones. You can record a total of 14 images in My Pictures.
Handset Operation Making Calls OK ON 1 22 ABC ABC GHI 4 GHI PQ 7PQ RS RS JKL 55JKL TUV 88TUV OFF • DEF 3 DEF MNO 6 MNO WX YZ 9 WX Z • ON 1 OFF ABC 22ABC GHI 4 GHI PQ 7PQ RS RS TONE TONE Advance Operation OK JKL 55JKL TUV 88TUV Press ON (or, SPEAKERPHONE to use the Handset Speakerphone feature). Dial the phone number. -ORDial the phone number first; then press ON (or SPEAKERPHONE). Press OFF or place the Handset in the charger cradle to end your call.
Handset Operation 1 1 Treble Boost TREBLE - High Frequency sounds enhanced. HOLD 12:30PM MUTE NATURAL - No frequency enhancement (Your Handset is preset to this selection). 1 1 Natural Audio The Handset will graphically display these four modes. HOLD 12:30PM MUTE Mute Function During an active call pressing the MUTE softkey on the Handset, will disable the microphone. Press MUTE again to return to normal two-way conversation. Hold Function Press the HOLD softkey to place a call on hold.
Handset Operation Handset Speakerphone Operation Your i 5807 Handset has a built-in handsfree speakerphone. This feature allows you to stand the Handset upright on a table or desktop and have handsfree conversations. For more information, refer to Making Calls in the Handset Operation section.
Handset Operation Press Press Press When Press Press any NavKey then press the 1 key. the up or down NavKey to the desired location. the middle NavKey to confirm. the ringing Handset answers, announce that there’s an active call on hold. OFF on either handset. ON (on the destination Handset) to pick up the call on hold.
Headset Operation Your i 5807 Handset is equipped with a 2.5mm Headset Jack for use with an optional accessory Headset for handsfree operation. If you choose to use the Headset option, you must obtain an optional accessory Headset, which is compatible with the i 5807. For best results, use a VTech 2.5mm headset. To purchase a Headset, call VTech Customer Service at 1-800-595-9511. Once you have a compatible 2.5mm Headset, locate the Headset Jack on the i 5807 Handset.
Maintenance Taking care of your telephone Your cordless telephone contains sophisticated electronic parts, so it must be treated with care. Avoid rough treatment Place the Handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water Your telephone can be damaged if it gets wet. Do not use the Handset outdoors in the rain, or handle it with wet hands. Do not install your Base Unit near a sink, bathtub, or shower.
In Case Of Difficulty If you have difficulty operating your phone, the suggestions below should solve the problem. If you still have difficulty after trying these suggestions, call VTech Communications at 1-800-595-9511. In Canada, call VTech Telecommunications Canada Ltd. at 1-800-267-7377. The phone doesn't work at all • • • Make sure the Power Cord is plugged in. Make sure the telephone line cord is plugged firmly into the Base Unit and the telephone wall jack.
In Case Of Difficulty You hear other calls while using your phone • Disconnect your Base Unit from the telephone jack, and plug in a regular telephone. If you still hear other calls, the problem is probably in your wiring or local service. Call your local telephone company. You hear noise in the Handset, and none of the keys or buttons work • Make sure the power cord is plugged in.
Warranty Statement What does this limited warranty cover? • The manufacturer of this VTech product, VTech Communications, warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the product and all accessories provided by VTech in the sales package (“Product”) are free from material defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with operation instructions.
Warranty Statement How do you get warranty service? • To obtain warranty service in the United States of America, call 1-800-595-9511 for instructions regarding where to return the Product. Before calling for service, please check the user’s manual. A check of the Product controls and features may save you a service call.
FCC, ACTA and IC Regulations This equipment complies with Parts 15 of the Federal Communications Commission (FCC) rules for the United States. It also complies with regulations RSS210 and CS03 of Industry and Science Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
FCC, ACTA and IC Regulations rules. If the equipment was approved after that date, it complies with the Part 68 rules and with Technical Requirements for Connection of Equipment to the Telephone Network adopted by the Administrative Council for Terminal Attachments (ACTA). We are required to provide you with the following information. 1.
FCC, ACTA and IC Regulations 5. Hearing aid compatibility If this product is equipped with a corded or cordless handset, it is hearing aid compatible. 6. Programming/testing of emergency numbers If this product has memory dialing locations, you may choose to store police, fire department and emergency medical service telephone numbers in these locations. If you do, please keep three things in mind: a.
FCC, ACTA and IC Regulations Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electrical inspection authority or electrician as appropriate.
Technical Specifications FREQUENCY CONTROL WEIGHT Crystal controlled PLL synthesizer Handset: Charger: 164 grams (excluding battery cells) 207 grams TRANSMIT FREQUENCY POWER REQUIREMENTS Base: 5725-5850 MHz Handset: 2400-2483.5 MHz Handset: 2 cell AA 1.2V 1400mAh NiMH Battery RECEIVE FREQUENCY Charger: 6V DC @300mA Base: 2400-2483.
VTECH TELECOMMUNICATIONS LTD. A member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications Inc., Beaverton, Oregon, 97008 Distributed in Canada by VTech Telecommunications Canada Ltd., 200-7671 Alderbridge Way, Richmond, B.C. V6X 1Z9. Copyright 2004 for VTECH TELECOMMUNICATIONS LTD.
Table of Contents Introduction....................................................................................................................1 Important Safety Instructions..................................................................................2 Getting Started.............................................................................................................4 Parts Check List...........................................................................................................
